茸阀流体上海阀门网
产品导航 网站地图
咨询电话
当前位置:茸阀流体上海阀门网 > 电磁阀 > 高温电磁阀
更新时间:2020-09-28 19:52:22

高温电磁阀

高温电磁阀】是电磁阀旗下产品,我们可为客户提供相关高温电磁阀、标准、作用、结构图、规格、型号、外形尺寸、工作原理、说明书、欢迎来电咨询、采购。

  使用高温电磁阀先要检查电磁阀是否与选型参数一致,比如电源电压、介质压力、压差等,尤其是电源,如果搞错,就会烧坏线圈。电源电压应满足额定电压电压波动范围:交流+10%~-15%,直流+10%~-10%,平时线圈组件不宜拆开。

  When Using The High Temperature Solenoid Valve, Check Whether The Solenoid Valve Is Consistent With The Selection Parameters, Such As Power Supply Voltage, Medium Pressure, Differential Pressure, Etc., Especially The Power Supply. If The Power Supply Is Wrong, The Coil Will Be Burned Out. The Power Supply Voltage Should Meet The Voltage Fluctuation Range Of Rated Voltage: Ac + 10% ~ - 15%, Dc + 10% ~ - 10%. Usually, The Coil Assembly Should Not Be Disassembled.

  高温电磁阀在接管之前要对管道进行冲洗,把管道中的金属粉末及密封材料残留物,锈垢等清除。 要注意介质的洁净度,如果介质内混有尘垢,杂质等妨碍电磁阀的正常工作,管道中应装过滤器或滤网。

  Before Connecting The High Temperature Solenoid Valve, The Pipeline Should Be Flushed To Remove The Metal Powder And Sealing Material Residues, Rust And Scale In The Pipeline. Pay Attention To The Cleanliness Of The Medium. If The Medium Is Mixed With Dust, Impurities, Etc., Which Hinder The Normal Operation Of The Solenoid Valve, A Filter Or Filter Screen Shall Be Installed In The Pipeline.

  高温电磁阀一般的电磁线圈部件应竖直向上,竖直安装在水平于地面的管道,如果受空间限制或工况要求须按侧立安装的,需在选型订货时提出。否则可能造成电磁阀不能正常工作。

  The General Solenoid Coil Components Of High Temperature Solenoid Valve Shall Be Vertically Upward And Vertically Installed In The Pipeline Horizontal To The Ground. If It Is Required To Be Installed On The Side Due To Space Limitation Or Working Conditions, It Shall Be Put Forward In The Selection And Ordering. Otherwise, The Solenoid Valve May Not Work Normally.