全自动过滤器
产品导航 网站地图
咨询电话
当前位置:茸阀流体上海阀门网 > 过滤器 > 全自动过滤器
更新时间:2020-10-22 22:55:10

全自动过滤器

全自动过滤器】是过滤器旗下产品,我们可为客户提供相关全自动过滤器、标准、作用、结构图、规格、型号、外形尺寸、工作原理、说明书、欢迎来电咨询、采购。

  全自动过滤器的水由入水口进入机体,水中的杂质沉积在不锈钢滤网上,由此产生压差。通过压差开关监测进出水口压差变化,当压差达到设定值时,电控器给水力控制阀、驱动电机信号,引发下列动作:电动机带动刷子旋转,对滤芯进行清洗,同时控制阀打开进行排污,整个清洗过程,当清洗结束时,关闭控制阀,电机停止转动,系统恢复至其初始状态,开始进入下一个过滤工序。设备安装后,由技术人员进行调试,设定过滤时间和清洗转换时间。

  The Water Of The Automatic Filter Enters The Body From The Water Inlet, And The Impurities In The Water Are Deposited On The Stainless Steel Filter Net, Resulting In Pressure Difference. The Differential Pressure Switch Is Used To Monitor The Change Of Pressure Difference At The Inlet And Outlet. When The Pressure Difference Reaches The Set Value, The Electric Controller Sends Signals To The Hydraulic Control Valve And The Driving Motor, Causing The Following Actions: The Motor Drives The Brush To Rotate To Clean The Filter Element, At The Same Time, The Control Valve Is Opened For Sewage Discharge. During The Whole Cleaning Process, When The Cleaning Is Finished, The Control Valve Is Closed, The Motor Stops Rotating, And The System Returns To Its Original State State, Start To Enter The Next Filtering Process. After The Equipment Is Installed, The Technical Personnel Will Carry Out The Debugging, And Set The Filtering Time And Cleaning Conversion Time.